Selecting Dual Band Mode/ Single Band Mode - Kenwood TM-V71A Instruction Manual

Pressing [PF2] allows you to switch the operating band between bands A and B,
while maintaining the original band as the transmit band.
Band A is the transmit band and band B is the operating band:
Band A is both the transmit and operating band:

SElECTINg duAl BANd mOdE/ SINglE BANd mOdE

You can switch the transceiver between dual band operation and single band
operation by pressing [BAND SEL] (1s) of your selected band.
Dual band mode:
Single band mode (band A only):
Note: You can also turn the center partion bar display off {page 72}.
16