Kenwood TM-V71A Instruction Manual page 36

n Selecting a Tone Frequency
To select the tone frequency required to access your desired repeater:
1 Turn the Tone function ON.
2 Press [F], [TONE].
• The current tone frequency appears on the display. The default frequency is
88.5 Hz.
3 Rotate the Tuning control to select your desired frequency.
• To exit the tone frequency selection, press [F] (ESC).
4 Press any key other than the Tuning control and [F] (ESC) to set the
selected frequency.
Note: If you have set up a Memory channel with a tone setting, simply recall the Memory
channel instead of setting up the tone frequency every time.
Frequency
No.
(Hz)
01 67.0
02 69.3
03 71.9
04 74.4
05 77.0
06 79.7
07 82.5
08 85.4
09 88.5
10 91.5
11 94.8
28
Frequency
No.
(Hz)
12 97.4
13 100.0
14 103.5
15 107.2
16 110.9
17 114.8
18 118.8
19 123.0
20 127.3
21 131.8
22 136.5
Frequency
No.
(Hz)
23 141.3
24 146.2
25 151.4
26 156.7
27 162.2
28 167.9
29 173.8
30 179.9
31 186.2
32 192.8
33 203.5
Frequency
No.
(Hz)
34 206.5
35 210.7
36 218.1
37 225.7
38 229.1
39 233.6
40 241.8
41 250.3
42 254.1