Table of Contents
Advertisement
M enu system
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
Display
"BEEP ON"
"BEEP OFF"
M anual Clock A djust m ent
This adjustment can be done w hen the <Synchronize Clock> (page
20) is set as OFF. (KRC-265RG)
1
Select Clock Adjustment mode
Press the [FM ] or [AM ] button.
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 2 seconds.
The clock display blinks.
3
Adjust the hours
Press the [FM ] or [AM ] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [M ENU] button.
Setting
Beep is heard.
Beep canceled.
— 20 —
Synchronize Clock
Synchronizing the RDS station tim e data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
It takes 3 to 4 minutes to synchronize the clock.
N ew s Bullet in w it h Tim eout Set t ing
It sw itches autom atically w hen a new s bulletin starts even if the
radio isn't being listened to. Also, the tim e interval w hen
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M "
"NEWS 90M "
When "NEWS 00M " — "NEWS 90M " is set, the New s Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the new s bulletin starts, "NEWS" is displayed, and it
sw itches to the new s bulletin.
• If you choose the "20M " setting, further new s bulletins w ill not be
received for 20 minutes once the first new s bulletin is received.
• The new s bulletin volume is the same level that w as set for traffic
information (page 10).
• This function is only available if the desired station sends PTY-code
for new s bulletin or belongs to <Enhanced Other Netw ork>-
Netw ork sending PTY-code for new s bulletin.
Function of the KRC-265RG
Setting
Synchronizes the time.
Adjust the time manually.
Function of the KRC-265RG
Advertisement
Table of Contents
