Options; Memory Control Program Mcp-2A - Kenwood TM-V71A Instruction Manual

The following options are available for use with this transceiver:
• DFK-3D Detachable Front Panel Kit (3 m)
• MC-45 Microphone
• MC-59 Microphone with keypad
• MCP-2A Memory Control Program
(web download software)
• MJ-88 Microphone Plug Adapter
• MJ-89 Modular Plug Microphone
Switch
• PG-2N DC Cable (2 m)
• PG-20 DC Cable (7 m)
Note: Optional accessories for use with this transceiver may change, post-production. (New
options may become available and/or current options may be discontinued.) Please refer to the
options catalog(s) for applicable transceivers.

MeMOry cONTrOl PrOgraM McP-2a

The following functions can be set only by using the MCP-2A software:
• SQC active condition
• Microphone sensitivity level
• 10 MHz mode selection
• Power on password value
Using the MCP-2A software, you can:
• View memory channel groups
• Name memory groups
• Name PM channels
• Save/load settings
• Read exported TravelPlus for Repeaters
• Print/export memory and various settings in html
(TravelPlus for Repeaters is a trademark of ARRL.)
To download the MCP-2A software, go to:
http://www.kenwood.com/i/products/info/amateur/software_download.html
Note: This URL may change without notice.
n Using the McP-2a Software
1 Follow the directions of the installer to install the software.
2 Set up the PC COM port and baud rate.
3 The transceiver data is read from the MCP-2A software.
4 Select your desired settings, then write the data to the transceiver.

OPTIONS

• PG-3B
• PG-5A
• PG-5G
• PG-5H
• PG-5F
• PS-33
• PS-53
• SP-50B
• VGS-1
™
files issued from the ARRL
Noise Filter
Data Cable
Programming Interface Cable
(2 m)
PC Interface Cable Kit (2 m)
Extension Cable Kit (4 m)
DC Power Supply
DC Power Supply
External Speaker
Voice Guide & Storage Unit
™
89