Table of Contents
Advertisement
DDX672BH
DDX492
DDX415BT
DDX392
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DDX672BH/DDX492/DDX415BT/DDX392/DDX372BT/DDX320BT/DDX315/DDX272 Serial number
US Residents Only
Register your Kenwood product at www.Kenwoodusa.com
© 2014 JVC KENWOOD Corporation
DDX372BT
DDX320BT
DDX315
DDX272
Register Online
This HD Radio receiver enables:
B5A-0214-00 (KN/RN)
Advertisement
Table of Contents
Need help?
Do you have a question about the DDXBH and is the answer not in the manual?
Questions and answers
Добрый день! Нажал "обновления" и теперь не работают кнопки управления на руле. Как их подключить, подскажите пожалуйста?
To reconnect the steering wheel control buttons on the Kenwood DDXBH after pressing "updates," follow these steps:
setting screen. screen.
1. Display the
2. Go to the
3. Press a button on the steering remote controller to register or change its function.
4. Select a function to assign to the button.
5. Repeat steps 3 and 4 for other buttons as needed.
6. After assigning all functions, press [Done] to finish the setup.
Ensure the vehicle is parked, and the steering remote controller is compatible. If learning fails, an error message may appear.
This answer is automatically generated