Kenwood TM-V71A Instruction Manual page 58

You can also select a CTCSS frequency by using the microphone:
1 Select your desired band.
2 Press [TONE] 2 times to activate the CTCSS function.
• The icon appears on the display when the CTCSS function is ON.
• Each press of [TONE] changes the selection as follows:
Tone (T) –> CTCSS (CT) –> DCS (DCS) –> Off (no display).
3 Press [F], [TONE].
• The current CTCSS frequency appears on the display and blinks.
4 Press the key programmed as [ENTER].
5 Enter a frequency reference number (01 ~ 42) using the microphone keypad.
• Refer to the table below for frequencies and their reference numbers.
Frequency
No.
(Hz)
01 67.0
02 69.3
03 71.9
04 74.4
05 77.0
06 79.7
07 82.5
08 85.4
09 88.5
10 91.5
11 94.8
50
Frequency
No.
(Hz)
12 97.4
13 100.0
14 103.5
15 107.2
16 110.9
17 114.8
18 118.8
19 123.0
20 127.3
21 131.8
22 136.5
Frequency
No.
(Hz)
23 141.3
24 146.2
25 151.4
26 156.7
27 162.2
28 167.9
29 173.8
30 179.9
31 186.2
32 192.8
33 203.5
Frequency
No.
(Hz)
34 206.5
35 210.7
36 218.1
37 225.7
38 229.1
39 233.6
40 241.8
41 250.3
42 254.1