External Speaker Configuration; Masking A Band - Kenwood TM-V71A Instruction Manual

EXTERNAL SPEAKER CONFIGURATION

This transceiver has two speaker jacks for external speakers, as well as an
internal speaker. You can enjoy a variety of speaker configurations by using
one or two external speakers. Received signals on bands A and B are output
depending on how you want the internal and/or external speakers to function.
1 Enter Menu mode and access Menu 002 (EXT.SP) {page 20}.
2 Set the speaker mode to MODE 1 or MODE 2.
• Refer to the table below for configurations based on the mode selected.
Mode
MODE 1
MODE 2

MASKING A BAND

If you have no plans to use band A or B, you can hide the frequency display on
the unused band. This saves power consumption and makes it simpler to read
the information you need.
1 Turn the transceiver power OFF.
2 Press the left or right [BAND SEL] + Power ON.
• The band mask display appears.
3 Rotate the Tuning control to select the band you want to hide (or return to
normal).
Speaker
Setup
None
SP1 only
SP2 only
SP1, SP2
None
SP1 only
SP2 only
SP1, SP2
Band Output
Internal
External SP1
Speaker
A, B
x
A
x
A, B
x
B
x
External SP2
–
A, B
–
A
–
A, B
–
B
–
–
B
B
–
–
A
A
71