Selectable Illumination; Touch Sensor Tone; Switching Preout - Kenwood KDC-9011 Instruction Manual

English
Other features
Selectable HMlumination
| ;
The beep sound is not output from the preout jacks.
Switching preout
Switching the preout:
1 Press the MENU button at least for one second.
'MENU' is displayed and the menu mode is turned on.
3 Switching settings
Press either the AM button or FM button .
The display and setting will change.
"SWPRE Rear" (Rear preout)
"SWPRE N-Fad" (Non-fading preout)
3 Switching settings
Press either the AM button or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
Touch Sensor Tone
Switching the Beep On/Off:
1 Press the MENU button for at least one second.
"MENU' is displayed and the menu mode is turned on.
—30—