Fujitsu D2109 Technical Manual page 18

PCI bus
PCI slot 64bit/
32bit
3
4
5 32 bit
10 64 bit
IOOP™ (PCI bus speed optimisation)
The hardware of the system board optimizes the PCI bus speed of the slots 1,
2 and 10, depending on the slots' population.
– the PCI bus speed is 133 MHz, if only one of the three slots (or no slot) is
populated.
– the PCI bus speed is 100 MHz for all other population variants for slot 1, 2
and 10.
Zero Channel RAID (with SAS controller D2107)
PCI slot 1 (blue sockel) is prepared for Zero Channel RAID (ZCR). ZCR means
that the SCSI controller is seen as SCSI RAID controller through the inserted
SAS controller D2107. The PCI bus then runs with 100 MHz.
18
Frequency Description
in MHz
PCI e x8 slot
PCI e x4 slot
33 32 bit PCI slot
100/133 PCI-X slot only for SAS controller D1207
Technical Manual
Features
D2109 (TX200 S3)