Fujitsu D2109 Technical Manual page 41

SCSI/IME configuration program
Menu Spinup Properties
It is recommended: don't change this setting.























Spinup Delay Defines the intervals for the spinup of the hard disks.
The default setting is 2.
When this feature is enabled, the SAS devices which support
this function are not started by switching on the server until
they receive a „Start Unit" command from BIOS of the SAS
controller.
This function is used to distribute the high starting currents of
the SAS devices over a specific period and to release the power
supply of your server.
D2109 (TX200 S3)
Technical Manual























41