Handling Mo Disk; Inserting Mo Disk; Ejecting Mo Disk - Fujitsu DynaMO 1300U2 Pocket User Manual

3
-1

Handling MO Disk

1

Inserting MO Disk

3-1
Insert the disk front first into the MO slot. Push it in all the way until you
hear it click into place. After the MO disk is inserted, the access light
flashes for several seconds. During this time the MO drive checks the
control status of the MO disk and prepares for reading/writing.
2

Ejecting MO Disk

3-1
For Windows XP/Windows 2000 Users
Log on using an account with administrator privileges. If you are not logged on, refer to page 31 and change
your privileges using the Eject and format privilege Tool.
1.
Open [My Computer] and right-click the Removable Disk icon.
* The screen shown is for Windows XP.
2.
Select [Eject] from the shortcut menu.
3.
The MO disk is ejected from the MO drive.
■ Caution
1) Never eject an MO disk when the MO drive access light is flashing.
2) If you have a file from the MO disk open, close the file before ejecting the MO disk.
● Using the Eject button to remove disks
Check that the MO drive's access light is lit and then press the Eject button.
■ Caution
• Even after writing has finished on the computer, the MO drive may continue to operate using the cache writing function. To
ensure that your data is safely preserved, use the option in right-click menu to eject the MO disk.
29