Fujitsu DynaMO 1300U2 Pocket User Manual page 66

Windows 98 (including Second Edition) /Windows Me/ Windows 2000/ Windows XP
Question
Q7.
I can't use Disk Copy function.
Q8.
Although there is free disk
space on the MO disk, I can't
save files to it.
I formatted the MO disk and
then tried to copy from the
hard disk to the MO drive, but
none of the files were copied.
Although there was still free
space on the MO disk, after I
copied about 500 files to it, an
error message appeared and
the remaining files were not
copied.
Q9.
The drive icon is not displayed
when the PC wakes up from
energy saving mode.
Q10.
When connected using a hot
plug, the drive icon is
sometimes not displayed.
63
Check
—————
—————
—————
—————
Solution
The Disk Copy function on the shortcut menu cannot be used
with MO disks.
If the MO disk was formatted in the FAT16 (FAT) file format,
there is a limit to the number of files that can be registered in
the root directory. (If there are no files with long file names, the
maximum number of files is 512.)
If this occurs, create a folder and write the files into it. If you
cannot create a folder, delete some files and then create the
folder.
There is no limit to the number of files that can be stored in a
folder you create.
• Unplug the USB connector and then plug it back in.
Alternatively, connect to a different USB port.
• If it is connected via a USB hub, connect the MO drive directly
to the USB port on the computer itself.
• Restart the computer.
• Unplug the USB connector and then plug it back in.
Alternatively, connect to a different USB port.
• If it is connected via a USB hub, connect the MO drive directly
to the USB port on the computer itself.
• Restart the computer.