Connecting The Mo Drive To Your Computer - Fujitsu DynaMO 1300U2 Pocket User Manual

3.5-inch magneto-optical disk drive
Table of Contents

Advertisement

4

Connecting the MO Drive to Your Computer

2-2
Check that the MO Drive is connected correctly
1.
Open [My Computer].
* In Windows XP, select [My Computer] from the [Start] menu.
2.
If a removable disk icon appears, the MO drive has
been recognized successfully.
* If there is no [Removable Disk] icon, disconnect the USB cable
from your computer, wait a few moments and then reconnect it.
If the icon still does not appear, refer to the "Troubleshooting"
section.
Note
Once the drivers for this product are successfully installed, the devices listed below are added to the [Device
Manager] window.
Check the Device Manager
● In Windows 2000
Right-click the [My Computer] icon, click [Properties], click the [Hardware] tab and then click [Device
Manager] to open the Device Manager window.
● In Windows XP
From the [Start] menu, right-click [My Computer], click [Properties], click the [Hardware] tab and then click
[Device Manager] to open the Device Manager window.
Windows 2000/
Windows XP
18
1.
OS
USB (Universal Serial Bus)
Controllers
Disk Drives
Storage Area Volume
Connect the USB cable (mini-B connector) to
the USB port on the MO drive.
2.
Connect the USB cable (A-type connector) to the USB
port on your computer.
Added Location
Windows 2000
Added Device Name
USB High Capacity Storage Device
FUJITSU MCS3130UB-S USB Device
General-purpose Volume
Windows XP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents