The Mo Eject Tool; Overview Of Mo Eject Tool; Notes; Installing - Fujitsu DynaMO 1300U2 Pocket User Manual

5
-1

The MO Eject Tool

1

Overview of MO Eject Tool

5-1
The MO Eject tool automatically ejects MO disks at Shut down (Turn off)/Restart/Hibernate/Standby/Log off.
2

Notes

5-1
1) To change settings of the MO Eject Tool on Windows 2000/Windows XP, log on with the [Administrators]
privileges or the [Computer Administrator] account. The changes apply to all users.
2) The most recent changes to [Eject] settings take effect.
3) You cannot eject the MO disk if the following error message appears:
Failed to lock the MO drive. Make sure to close all the windows and/or files opened from the MO drive.
When this error message appears, check that no other programs (Explorer, antivirus software etc.) are using
the MO disk. When you don't know which programs are using the MO disk, set the [Eject] settings of the MO
Eject Tool to [OFF], or select [Close], and eject the MO disk. (Refer to the Ejecting MO Disk on page 29.)
4) You cannot eject MO disks not supported (for example 2.3GB disks) by your drive.
3

Installing

5-1
To install the MO Eject Tool on Windows 2000/Windows XP, log on with the [Administrators] privilege or the
[Computer Administrator] account.
1.
Insert the enclosed CD-ROM into the CD-ROM drive.
2.
Click the [Install Eject Tool] button from the CD-ROM menu.
* When the program does not start, open the CD-ROM icon in [My Computer] and double click [FJSTART.EXE] file.
46