Optical Drive - HP TouchSmart tx2 Maintenance And Service Manual

Optical drive

NOTE: The optical drive spare part kit includes an optical drive bezel.
Description
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive
Optical drive weight saving blank
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Slide the optical drive release latch (1) toward you. (The optical drive is partially ejected from the
optical drive bay.)
3. Remove the optical drive (2) from the computer.
To install an optical drive, slide the optical drive into the optical drive bay until you hear a click.
Battery on page 38).
Spare part number
509073-001
509074-001
518183-001
Component replacement procedures 43