HP TouchSmart tx2 Maintenance And Service Manual page 78

4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Memory module compartment cover (see
c. Optical drive (see
d. Keyboard (see
e. Switch cover (see
f. Display assembly (see
g. Top cover (see
h. Power switch assembly (see
i. System board (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
70 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Display assembly on page
Top cover on page
System board on page
The gold triangle (3) on the processor should be aligned with the triangle (4) embossed
38).
40)
Memory module on page
43)
49)
51)
53)
56)
Power switch assembly on page
61)
44)
58)