Battery - HP TouchSmart tx2 Maintenance And Service Manual

Hp touchsmart tx2 notebook pc
Table of Contents

Advertisement

Battery

Description
8-cell, 73-Wh, 2.55-Ah, Li-ion battery
8-cell, 73-Wh, Li-ion battery for use in Japan
6-cell, 55-Wh, 2.55-Ah, Li-ion battery
4-cell, 37-Wh, 2.55-Ah, Li-ion battery (for use only with computer models equipped with the
AMD Turion 64 processor)
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
Remove the battery:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Slide the battery lock latch (1) to your right, and then release it. (The battery disengages from
the computer.)
3.
Slide the battery release latch (2) to your left, and then release it.
4.
Remove the battery (3) by sliding it straight back.
To install a battery, slide the battery into the battery bay until you hear a click.
38
Chapter 4 Removal and replacement procedures
Spare part number
463650-003
534133-291
441132-003
441131-003

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents