Changing The Language Of The Setup Utility; Navigating And Selecting In The Setup Utility; Displaying System Information - HP TouchSmart tx2 Maintenance And Service Manual

Changing the language of the Setup Utility

The following procedure explains how to change the language of the Setup Utility. If the Setup Utility
is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. To start the Setup Utility, turn on or restart the computer, and then press
to enter setup" is displayed in the lower-left corner of the screen.
2. Use the arrow keys to select System Configuration > Language, and then press enter.
3. Press
language.
4. When a confirmation prompt with your preference selected is displayed, press
preference.
5. To set your preferences and exit the Setup Utility, press
the screen.
Your preferences go into effect when the computer restarts in Windows.

Navigating and selecting in the Setup Utility

Because the Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field,
use either the arrow keys or
●
To select an item, press enter.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while the Setup Utility is open, press
f1.

Displaying system information

The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1. To start the Setup Utility, turn on or restart the computer, and then press
to enter setup" is displayed in the lower-left corner of the screen.
2. Access the system information by using the Main menu.
3. To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter. (The computer restarts in Windows.)
72 Chapter 5 Setup Utility
f5 or f6 (or use the arrow keys) to select a language, and then press
f5 or f6.
f10 while "Press <F10>
enter
enter
f10 and then follow the instructions on
f10 while "Press <F10>
to select a
to save your