Bluetooth Module - HP TouchSmart tx2 Maintenance And Service Manual

Hp touchsmart tx2 notebook pc
Table of Contents

Advertisement

Bluetooth module

Description
Bluetooth module
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Remove the Phillips PM2.0×3.0 screw (2) that secures the Bluetooth module to the system
board.
60
Chapter 4 Removal and replacement procedures
Battery on page
38).
Hard drive on page
40)
Optical drive on page
Keyboard on page
49)
Switch cover on page
Display assembly on page
Top cover on page
56)
43)
51)
53)
Spare part number
483113-001
487697-001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents