If the PCI Wakeup Feature Does Not Work
If you have installed an accessory board that supports the PCI WakeUp
feature and the WakeUp feature does not work:
Refer to the accessory board documentation for instructions about
•
installing and using the board.
If There is an IRQ Problem Installing a Sound Board
If you have installed a sound board and you:
are using Windows NT 4.0
•
have followed the installation instructions provided with the sound
•
board
get a message telling you that there is no IRQ (Interrupt Request)
•
available for the sound board.
Then do the following:
1 Restart your PC and enter the Setup program. You enter Setup by
pressing
at startup.
2 Reserve an IRQ for the ISA sound board. You can reserve IRQ 5,
IRQ 9, IRQ 10 or IRQ 11 for this purpose. To do this, go to the "ISA
Resource Exclusion" submenu of the "Advanced" menu and then set
the chosen IRQ to "Reserved".
3 Save the changes, quit the Setup program and redo the
Windows NT 4.0 installation procedure for the sound board.
3 Troubleshooting Your PC
If the PCI Wakeup Feature Does Not Work
English
59