Pci Slot Numbers Used In The Pc's Setup Program - HP Vectra VL series 8 Maintenance Manual

1 How to Install Accessories In Your PC
Installing Accessory Boards
Slot 1 (the top slot) can be used for a full-length 32-bit PCI board.
•
Slot 2 can be used either for a full-length 32-bit PCI or a full-length
•
16-bit ISA board.
Slot 3 can be used either for a full-length 32-bit PCI or a full-length
•
16-bit ISA board.
Slot 4 (the bottom slot) can be used for a half-length 16-bit ISA
•
board.
Slot 5 (the supplementary slot) is under the power supply and can
•
be used for half-length 32-bit PCI boards. Alternatively, this space
can be used for a hard disk drive.

PCI Slot Numbers Used in the PC's Setup Program

Your PC uses logical slot numbers in the Setup program. You only need
to know these PCI slot numbers if you want to change the PCI slot
configuration in the Setup program. To enter the Setup program, press
during startup.
PCI Slot #1 is the top PCI slot. This corresponds to physical Slot "1"
•
marked on the PC's rear cover.
PCI Slot #2 is the second PCI slot from the top. It corresponds to
•
physical Slot "2" marked on the PC's rear cover.
PCI Slot #3 is the bottom PCI slot. It corresponds to physical Slot "3"
•
marked on the PC's rear cover.
PCI Slot #4 is the supplementary PCI slot under the power supply. It
•
corresponds to physical Slot "5" marked on the PC's rear cover.
24 English