Stand - HP Pro 3420 Maintenance & Service Manual

Stand

Description
Stand
The stand is secured with four screws. Remove the screws from the inside of the rear cover to
remove the stand.
To remove the stand:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. From the inside of the rear cover, remove the four screws that secure the stand in the order
indicated.
Figure 7-3
4. Lift the stand from the rear cover.
To replace the stand, reverse the removal procedures.
36 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
33).
Rear Cover on page
Removing the stand screws
Preparing to Disassemble the Computer
34).
Spare part number
665477-001