Hard Drive Cables and Connector
Description
Hard drive connector cable
The hard drive connector is secured with two screws and has two cables that connect to the system
board.
Figure 7-33
To remove the hard drive connector:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the rear cover (see
3.
Remove the hard drive (see
4.
Remove the system board cover (see
5.
Remove two screws (1) that secure the hard drive connector to the computer.
64
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
Hard drive cable location
33).
Rear Cover on page
Hard Drive on page
Preparing to Disassemble the Computer
34).
47).
System Board Cover on page
Spare part number
665725-001
49).