Table of Contents
Advertisement
Stand assembly
1.
Prepare the computer for disassembly (see
2.
Position the computer with the rear cover toward you.
CAUTION:
the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution
can result in damage to the display assembly.
3.
Rotate the top edge of the computer away from you until the display panel lies face down on
the work surface.
4.
Loosen the two captive screws that secure the stand assembly to the computer, and then remove
the stand assembly.
Reverse this procedure to install the stand assembly.
14
Chapter 4 Removal and replacement procedures
Before positioning the computer with the display assembly facing down, make sure
Preparation for disassembly on page
13).
Advertisement
Table of Contents
