HP Pro 3420 Maintenance & Service Manual page 20

Table 3-3 Computer Setup—Security (continued)
Slot Security
Network Boot
System IDs
12 Chapter 3 Computer Setup (F10) Utility
◦
USB Port 3
◦
USB Port 4
●
internal USB Ports
◦
USB Port 1
◦
USB Port 2
◦
USB Port 3
◦
USB Port 10
Allows you to disable or enable the PCI Express x1 slot. Default is enable.
Enables/disables the computer's ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
Express expansion card or embedded on the system board.) Default is enable.
Allows you to update:
●
Asset tag (18-byte identifier).
●
Ownership tag (80-byte identifier displayed during POST).
●
Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be
updated if the current chassis serial number is invalid. (These ID numbers are normally set in
the factory and are used to uniquely identify the system.)
●
Keyboard locale setting (for example, English or German) for System ID entry.