Attaching And Removing A Stand; Attaching And Removing An Easel Stand; Attaching An Easel Stand - HP ProOne 600 G3 21 inch All-in-One Business PC Hardware Reference Manual

Attaching and removing a stand

Two stands are available for the computer:

Attaching and removing an easel stand

●
Attaching and removing an adjustable height stand
●
Attaching and removing an easel stand

Attaching an easel stand

To install the stand:
1. Place the computer face down on a soft flat surface. HP recommends that you set down a blanket,
towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage.
2. Engage the hooks in the top of the stand in the two large holes in the upper part of the back of the
computer (1).
3. Rotate the stand down until it clicks into place (2).
Attaching and removing a stand 11