Table of Contents
Advertisement
ATTACHING LENS CAP
1
Attach the shorter end of lens cap string to
the lens cap.
2
Attach the longer end of lens cap string to the
attachment hole of DVD video camera/
recorder.
3
Push the both sides of cap inward and attach
it over the lens.
:
Note
• Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
• When recording, attach the lens cap to the hand strap
by hooking the tab inside the cap onto strap for
comfortable shooting.
INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote control.
1
While inserting a fine rod into the hole
marked PUSH, pull the battery holder out
forward.
2
Insert the lithium battery with the positive
terminal facing down.
22
3
Slide the cover to close it.
:
Note
The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible with
remote control: Replace the battery.
Battery holder
Shorter end
Longer end
Push and fit
Advertisement
Table of Contents
