Hold - Telrad Avanti 3015 User Manual

HOLD

There are two types of hold:
Exclusive hold: the call can be retrieved only from
•
your extension.
Inclusive hold: the call can also be retrieved by other
•
sets with a button for that appearance.
You cannot transfer a call that is on hold.
When you place a call on hold, you automatically receive
dial tone and can make a page call or dial to another exten-
sion. If you do not receive dial tone, this means that no DN
is available.
To place a call on exclusive hold
• Press [HOLD] once.
The indicator flashes green on your set and red on
other sets with a button for that line.
To place a call on inclusive hold
• Press [HOLD] twice.
The indicator flashes green on all sets that have a but-
ton for that line.
Depending on the programming of your extension, the first
press of hold may activate Inclusive hold, and the second
press, Exclusive hold. See your System Administrator.
To pick up a call from hold
• Press the flashing button of the call on hold.
or
1. Press [PICK UP].
2. Press [HOLD].
Avanti 3015 and Avanti 3000 sets 17