Table of Contents
Advertisement
The telephone sets' programmable buttons have dual-color
light indicators. The color and flash rate of the indicators
show the status of the programmed line, feature or exten-
sion.
In general, red indicates non-availability (for example, a
busy line); green indicates that you are using the feature or
line or that it is available to you.
User-programmable buttons
Some of the buttons on your telephone may be user-pro-
grammable SPEED DIAL or MEMORY buttons. You may
program these to access extensions, features or outside
lines.
Fixed feature buttons
The following fixed feature buttons appear on your tele-
phone set:
[HOLD]
This button places a call on hold.
[FEATURE]
Press [FEATURE] and then dial a feature access code to
activate features (see the Feature codes table at the end of
this guide).
[PICK UP]
Press this button to pick up calls.
[TRANSFER/CONFERENCE]
Press this button to transfer calls and when establishing
and exiting conference calls.
The [TRANSFER/CONFERENCE] button is
referred to as [TRANSFER] or [CONFER-
ENCE], depending on the operation being
described.
2
NOTE
Avanti 3015 and Avanti 3000 sets
Advertisement
Table of Contents
