Table of Contents
Advertisement
Many of the instructions offer a number of
options, one of which is pressing a DN button. If
your telephone set is not programmed with DN
buttons, choose one of the other options, or skip
the step of pressing the DN button.
Some of the features operate slightly differently
on a telephone set that is not programmed with
DN buttons. These differences are indicated
where relevant. Consult your System Adminis-
trator for further details about the programming
of your telephone set.
DN buttons may be programmed in three different modes:
•
ringing mode - the telephone rings and the DN button
flashes green when a call is received.
flashing mode - the DN button flashes green when a
•
call is received, but there is no ringing.
•
delayed ringing mode - a call rings first at another set
or group of sets, for a programmed length of time,
before beginning to ring at your set.
Outside line buttons
One or more of the buttons on your telephone may be
associated with either specific lines or outside line groups.
To access a line for dialing outside the system, press an
outside line button.
Floating buttons
Calls on outside lines for which no button has been
defined, may be associated with a button just for the dura-
tion of the call. These buttons are called "floating" buttons.
Some of the access codes in your system may
be different from those indicated here. If so, see
your system administrator for the correct codes.
Avanti 3015 and Avanti 3000 sets
NOTE
5
Advertisement
Table of Contents
