Table of Contents
Advertisement
5. Enter the new destination to which you want your calls
forwarded.
Instead of dialing the extension number, you may
press a MEMORY button programmed with an
extension number (for internal calls only) - or press
a SPEED DIAL button (or press [SPEED DIAL]
and dial a SPEED DIAL memory bin number) for
internal or external calls, as determined by the
contents of the memory. Calls are forwarded to the
contents of the MEMORY button or SPEED DIAL
bin. If you change the contents of the SPEED DIAL
bin, calls are forwarded to the new destination.
This does not apply to the MEMORY button.
6. Hang up.
To cancel call forwarding
1. Press the DN button (if applicable) and then press
[CANCEL] or [#].
2. Press [FEATURE].
3. Dial the code that designates what type of Call forward-
ing you want to cancel: [3][5], [3][2], or [3][6].
4. Dial the code that designates which of your calls are
currently forwarded and for which you want to cancel
the call forwarding programming: [2], [3], or [4].
If you want to cancel call forwarding for all DNs, press
[*].
5. Hang up.
Avanti 3015 and Avanti 3000 sets
NOTE
25
Advertisement
Table of Contents
