D-Link DES-3028 Cli Reference Manual page 65

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3028P:4#show log index 1-5
Command: show log index 1-5
Index Data
----- ----------------------------
5 00000-00-00 01:01:09 Successful login through Console (Username: Anonymous)
4 00000-00-00 00:00:14 System started up
3 00000-00-00 00:00:06 Port 1 link up, 100Mbps FULL duplex
2 00000-00-00 00:00:01 Spanning Tree Protocol is disabled
1 00000-00-00 00:06:31 Configuration saved to flash (Username: Anonymous)
DES-3028P:4#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DES-3028P:4#enable syslog
Command: enable syslog
Success.
DES-3028P:4#
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
Time Log Text
-------------------------------------------------------------------------------------
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent to
a remote host.
None.
Only administrator-level users can issue this command.
Used to enable the system log to be sent to a remote host.
disable syslog
The disable syslog command enables the system log to be sent to a
remote host.
None.
Only administrator-level users can issue this command.
DES-3028P:4#disable syslog
Command: disable syslog
Success.
DES-3028P:4#
61