D-Link DES-3028 Cli Reference Manual page 45

Managed 10/100mbps fast ethernet switch
Hide thumbs Also See for DES-3028:
Table of Contents

Advertisement

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
create snmp host
Restrictions
Example usage:
To create an SNMP host to receive SNMP messages:
DES-3028P:4#create snmp host 10.48.74.100 v3 auth_priv public
Command: create snmp host 10.48.74.100 v3 auth_priv public
Success.
DES-3028P:4#
delete snmp host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP host entry:
strategies. It includes improvements in the Structure of Management
Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 will be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
Message integrity − ensures that packets have not been
tampered with during transit.
Authentication − determines if an SNMP message is from a
valid source.
Encryption − scrambles the contents of messages to prevent
it being viewed by an unauthorized source.
noauth_nopriv
Specifies that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_nopriv − Specifies that authorization will be required, but there
will be no encryption of packets sent between the Switch and a remote
SNMP manager.
auth_priv − Specifies that authorization will be required, and that
packets sent between the Switch and a remote SNMP manger will be
encrypted.
<auth_sting 32> − An alphanumeric string used to authorize
a remote SNMP manager to access the Switch's SNMP
agent.
Only administrator-level users can issue this command.
Used to remove a recipient of SNMP traps generated by the Switch's
SNMP agent.
delete snmp host <ipaddr>
The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch's SNMP agent.
Only administrator-level users can issue this command.
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3052Des-3052pDes-3028p

Table of Contents