D-Link DES-3028 Cli Reference Manual page 37

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
Example usage:
To delete a previously entered SNMP user on the Switch:
DES-3028P:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-3028P:4#
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-3028P:4#show snmp user
Command: show snmp user
Username Group Name SNMP Version
--------------- --------------
initial
Total Entries: 1
DES-3028P:4#
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only administrator-level users can issue this command.
------------
initial V3
Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
view type – Sets the view type to be:
• included − Include this object in the list of objects that an
SNMP manager can access.
• excluded − Exclude this object from the list of objects that
an SNMP manager can access.
Only administrator-level users can issue this command.
Auth-Protocol PrivProtocol
-----------------
None
33
-----------------
None