D-Link DES-3028 Cli Reference Manual page 135

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
show dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the DHCP relay configuration:
Example usage:
To show a single IP destination of the DHCP relay configuration:
enable dhcp_relay
Purpose
Syntax
Description
Parameters
DES-3028P:4#config dhcp_relay option_82 policy replace
Command: config dhcp_relay option_82 policy replace
Success.
DES-3028P:4#
Used to display the current DHCP/BOOTP relay configuration.
show dhcp_relay {ipif <ipif_name 12>}
This command will display the current DHCP relay configuration for the
Switch, or if an IP interface name is specified, the DHCP relay configuration
for that IP interface.
ipif <ipif_name 12> - The name of the IP interface for which to display the
current DHCP relay configuration.
None.
DES-3028P:4#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold
DHCP Relay Agent Information Option 82 State : Enabled
DHCP Relay Agent Information Option 82 Check : Enabled
DHCP Relay Agent Information Option 82 Policy : Replace
Interface Server 1
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DES-3028P:4#
DES-3028P:4#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface Server 1
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DES-3028P:4#
Used to enable the DHCP/BOOTP relay function on the Switch.
enable dhcp_relay
This command is used to enable the DHCP/BOOTP relay function on
the Switch.
None.
Server 2 Server 3
Server 2 Server 3
131
: Enabled
: 2
: 23
Server 4
Server 4