D-Link DES-3028 Cli Reference Manual page 207

DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
To configure the response timeout for 60 seconds:
config authen parameter attempt
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the maximum number of authentication attempts at 5:
show authen parameter
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the authentication parameters currently set on the Switch:
DES-3028P:4# config authen parameter response_timeout 60
Command: config authen parameter response_timeout 60
Success.
DES-3028P:4#
Used to configure the maximum number of times the Switch will
accept authentication attempts.
config authen parameter attempt <int 1-255>
This command will configure the maximum number of times the
Switch will accept authentication attempts. Users failing to be
authenticated after the set amount of attempts will be denied
access to the Switch and will be locked out of further authentication
attempts. Command line interface users will have to wait 60
seconds before another authentication attempt. Telnet users will be
disconnected from the Switch.
parameter attempt <int 1-255> - Set the maximum number of
attempts the user may try to become authenticated by the Switch,
before being locked out.
Only administrator-level users can issue this command.
DES-3028P:4# config authen parameter attempt 5
Command: config authen parameter attempt 5
Success.
DES-3028P:4#
Used to display the authentication parameters currently configured
on the Switch.
show authen parameter
This command will display the authentication parameters currently
configured on the Switch, including the response timeout and user
authentication attempts.
This command will display the following fields:
Response timeout – The configured time allotted for the Switch to
wait for a response of authentication from the user attempting to log
in from the command line interface or telnet interface.
User attempts: The maximum number of attempts the user may try
to become authenticated by the Switch, before being locked out.
None.
None.
203