E Command Barcodes - Socket 7X User Manual

A E
PPENDIX
C B
OMMAND
Scan command barcode(s) to quickly configure the CHS 7X or 7XRx. By default, the CHS is
in HID mode as a Keyboard device.
IMPORTANT! Make sure the CHS is not connected to a host computer / device before
scanning a command barcode!
SPP Mode
Changes the CHS to Bluetooth Serial Port Profile (SPP) mode
(required for BlackBerry, optional for Windows and Android).
HID-Peripheral
Configures the CHS as a Peripheral class device
(optional for Windows and Android).
HID-Keyboard (default)
Configures the CHS as a Keyboard class device
(required for Apple iOS / Mac OS, Nokia E71).
Factory Reset
Configures the CHS to revert all settings to factory defaults. The CHS powers
off after scanning this barcode.
Version Information
Commands the CHS to output the
active application.
82
ARCODES
Bluetooth Connection Mode (General)
Factory Defaults
Firmware Information
firmware version information into an