Table of Contents
Advertisement
A
E
PPENDIX
C
B
OMMAND
ARCODES FOR
Scan command barcode(s) to quickly configure the Socket Bluetooth Cordless Hand Scanner 7C.
By default, the CHS 7C is in HID mode as a Keyboard device.
IMPORTANT! Make sure the CHS 7C is not connected to computer / device before scanning a command barcode!
IMPORTANT! Print out the page to scan the barcodes. Do not scan them onscreen.
For command barcodes that enable / disable symbologies, please seethe Command Barcodes Sheet for CHS 7C on the
CD or online at:
http://www.socketmobile.com/support/downloads
For command barcodes for the CHS 7E, 7M, 7P or 7NRx, please see
Command Barcodes for CHS 7C in HID Mode
These command barcodes can be scanned with a CHS 7C in HID mode. Some will not work for a CHS 7C in SPP mode. If
you do not know which mode your CHS is in, scan the command barcode for HID Mode to make sure it is in HID mode.
If you have a CHS 7C in SPP mode, see page
SPP Mode
Changes the CHS to Serial Port Profile (SPP) mode.
Required for BlackBerry, optional for Windows and Android.
HID-Peripheral
Changes a CHS in HID-Keyboard mode to HID-Peripheral mode.
Optional for Windows and Android.
HID-Keyboard (default)
Changes a CHS in HID-Peripheral mode to HID-Keyboard mode.
Required for Apple iOS, Mac OS, Nokia E71.
ENABLE Automatic Reconnection from CHS (default)
Configures the CHS to automatically initiate a connection to the last paired
computer / device after the CHS is powered on.
IMPORTANT! After scanning this command barcode, power off and power on the
CHS to make sure it is configured properly.
DISABLE Automatic Reconnection from CHS
Configures the CHS to wait for a computer / device to initiate a Bluetooth
connection after the CHS Is powered on.
IMPORTANT! After scanning this command barcode, power off and power on the
CHS to make sure it is configured properly.
96
CHS 7C
Appendix
100
for relevant command barcodes.
Bluetooth Connection Settings
F.
Advertisement
Table of Contents
