Command Barcodes - Socket CHS 7XiRx Quick Start Manual

Make sure the scanner is not connected to a device before scanning a command
barcode! (See page 18 for unpairing instructions)
For a complete set of command barcodes, download the Command Barcodes Sheet:
https://www.socketmobile.com/support/download
Auto Mode (Presentation Mode)
Scanning this bar code will enable the scan-
ner to enter auto mode when placed in Socket
Mobile's Charging Stand. When the scanner is in
auto mode, it will switch to presentation trigger
mode when it detects power on the cradle pins.
When the scanner is removed from the cradle it
will remain in presentation trigger mode until
the users presses the trigger. At that point it
will switch to normal manual trigger mode. Auto
Mode command barcode is also printed on the
product label.
Mobile Mode - Normal (default)* Scanning this
bar code will enable the scanner to enter mobile
mode. It will always be in manual trigger mode
even when placed in the stand or cradle.
*Scanner Factory Reset returns to Mobile Mode.

COMMAND BARCODES

Charging Stand Modes
#FNB 41FBA50003#
#FNB 41FBA50000#
21