Socket 1D User Manual page 22

To pair and connect the CHS with your computer:
You only need to pair the CHS with you computer the first time you try to connect.
The following instructions are based on Socket EZ Pair, a feature of SocketScan 10
software. For instructions on how to connect by generating and scanning a special
barcode, please see
1. IMPORTANT! If using Windows 7 or Vista, make sure you are running SocketScan 10
software with administrative privileges. Right-click on the SocketScan 10 desktop
shortcut icon. In the pop-up menu, click Properties. Click Advanced... Select Run as
administrator and click OK.
2. Power on the CHS. Press and hold the small power button until the LED turns blue and
the CHS beeps twice (low-high).
The LED blinks blue once per second to show that the Bluetooth radio is on but not
connected.
3. Scan this barcode to change the CHS to SPP mode. Afterwards, the CHS will beep 3 times.
IMPORTANT! Print out this page to scan the barcode. Do not scan it onscreen.
4. Turn on Bluetooth
instructions.
5. Follow the correct instructions for your Bluetooth stack to pair with the CHS (see next page).
22
Appendix I.
on your computer. Refer to your computer's documentation for