C Barcode Label Specifications - Socket 1D User Manual

A C
PPENDIX
B L S
ARCODE ABEL PECIFICATIONS
All barcode symbols/labels should satisfy the appropriate AIM Uniform Symbology Specification.
Note: The CHS 7C can also scan barcodes on device screens.
Background Substrate:
The barcode symbol should be printed on material (media) that is reflective and has a matte (not
glossy) finish. A background diffuse reflectance of at least 70% to 80% is desirable for optimum
contrast. Retro-reflective media should be used to obtain decode distances greater than 36 inches.
Ink Color and Type:
The inked bars should not exceed 25% reflectance at the wavelength that is being used for
reading, whether printed with black ink or colored ink. The reflectance value should not vary
more than 5% within the same character.
Voids and Specks:
The code should be printed clearly, free of voids, specks, blemishes and lines that could "fool" the
scanner. Specks or blemishes in the white spaces, or false or missing bar sections could be
interpreted by the reading equipment as part of the code. Generally, the width of such flaws is
more serious than the height. Code symbols/ labels should be rejected if these defects are present.
Definition:
The bars in the barcode symbol should be well defined. Their edges should not be rough or fuzzy,
so that the bars and spaces have the proper widths intended for the barcode symbology used.
Contrast:
Background reflectance (that of the substrate on which the codes are printed) should always
provide a good contrast relative to the ink reflectance (that of the code bars). The difference
between the two should be at least 37.5% at the wavelength used for reading.
Tolerance:
The ratio of the widths of bars and spaces in a barcode symbol must conform to the appropriate
AIM barcode specifications and can cause problems if not correct throughout the barcode.
Problems can occur when bar edges are smeared or rough, or when they exhibit voids.
92