Socket 1D User Manual page 10

Vibrate
Vibrate
Vibrate for 7P or 7NRx
To modify the LED, beep and vibrate settings, you can use the
the CHS supports SPP mode for your OS, the Scanner Settings utility (see chapter for your
OS).
Bluetooth Mode Sequence
When the CHS is powered on, its Bluetooth mode will gradually change if no connection is made.
Time after turning on CHS
0-5 minutes
5-20 minutes
20 minutes
Simultaneous Use of CHS and Socket Plug-in Device
You can use the CHS and a Socket plug-in barcode / RFID / magnetic stripe reader simultaneously on
the same host computer or device. However, you will need to run two different versions of SocketScan
concurrently.
• For the CHS, use SocketScan 10, which you can download from:
http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
• For Socket plug-in devices, use SocketScan 7 (or older), which you can download from:
http://www.socketmobile.com/support/downloads/data-collection/series5/
• For more information about Socket plug-in devices for data collection, please visit:
http://ww1.socketmobile.com/products/handheld-computers/accessories-
hc.aspx?cat=Data%20Collection
10
Power on OR data successfully scanned and sent to host device.
Bluetooth mode
Discoverable and connectable
Connectable
CHS automatically powers off
Meaning
Command Barcodes, or if