Protecting The Boot Manager With A Password - Nokia IP200 Series Installation Manual

7
Using the Nokia IPSO Boot Manager
For example:
BOOTMGR[2]> sysinfo
CPU 0: 866 MHz Pentium-III w ATC
Memory: 536870912 (512M bytes)
Disk Devices:
T, 512 B/S
Network Interfaces:
eth-s1p1:
eth-s1p2:
eth-s1p3:
eth-s1p4:
loop0:
soverf0:
stof0:
tun0:
eth1:
eth2:
eth3:
eth4:
BOOTMGR[3]>

Protecting the Boot Manager with a Password

To prevent accidental or unauthorized access to the information stored on
your appliance, you can require that the user enter a password to access the
72
IO port 0x1f0 wdc0: unit 0 (wd0): <SanDisk SDCFB-16>
16MB (31360 sectors), 31 cyls, 16 heads, 63 S/T, 512 B/S
IO port 0x1f0 wdc0: unit 1 (wd1): <IC35L020AVER07-0>
20576MB (40188960 sectors), 2501 cyls, 255 heads, 63 S/
flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:78 speed 10M half duplex
flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:79 speed 10M half duplex
flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:7a speed 10M half duplex
flags=131<LINK,BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:7b speed 10M half duplex
flags=10b<UP,LINK,LOOPBACK,PRESENT>
flags=2923<UP,LINK,MULTICAST,PRESENT,IPV6ONLY>
flags=2903<UP,LINK,PRESENT,IPV6ONLY>
flags=107<UP,LINK,POINTOPOINT,PRESENT>
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:8a speed 10M half duplex
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:8b speed 10M half duplex
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:88 speed 10M half duplex
flags=130<BROADCAST,MULTICAST,PRESENT>
ether 0:a0:8e:40:a5:89 speed 10M half duplex
Nokia IP200 Series Security Platform Installation Guide