Managing Ip200 Security Platform Appliances - Nokia IP200 Series Installation Manual

1
Overview
Caution
Do not place objects over the ventilation holes on the IP200
appliance. The components might overheat and become damaged.
Caution
For IP200 appliances intended for shipment outside of the United
States, the power cord might not be included. If a power cord is not
provided, use a power cord rated at 6A, 250V, maximum 15 feet
long, made of HAR cordage and IEC fittings approved by the country
of end use.

Managing IP200 Security Platform Appliances

You can manage Nokia IP200 appliances by using one of the following
interfaces:
Nokia Network Voyager—an SSL-secured, Web-based element
management interface to Nokia IP security platforms. Network Voyager is
preinstalled on the IP200 appliance and enabled through the IPSO
operating system. With Network Voyager, you can manage, monitor, and
configure the IP200 appliance from any authorized location within the
network by using a standard Web browser.
For information about how to access Network Voyager and the related
reference materials, see
Appliance"
The Nokia IPSO command-line interface (CLI)—an SSHv2-secured
interface that
from the
Voyager—to manage and configure the IP200 appliance—you can also do
with the CLI.
28
"Using Nokia Network Voyager to Manage Your
on page 46.
enables you to configure Nokia IP security platforms
line.
command Everything that you can accomplish with Nokia
Nokia IP200 Series Security Platform Installation Guide