Nokia IP200 Series Installation Manual page 60

6
Installing Flash-Memory PC Cards
To use Nokia Network Voyager to disable a flash-memory PC card
you use for storing system logs before you remove it
1. Click System Logging under System Configuration and check the
Unselect check box.
2. Click Apply.
3. Click Up.
Click Optional Disks under System Configuration and click the Off
4.
radio button under Local Logging.
5. Click Apply.
6. Click Save.
7. Click Up.
8. Click Reboot, Shut Down System to shut down or reboot the appliance.
You can now remove the flash-memory PC card.
To use the CLI to disable a flash-memory PC card you use for
storing system logs before you remove it
1. Enter the following command:
set syslog local-log off
2. Enter the following command, where the number 1 or 2 indicates the
PC-card slot:
set optional-disk device-id <1 | 2> off
3. Enter the following command:
halt
You can now remove the flash-memory PC card.
60
or
reboot
Nokia IP200 Series Security Platform Installation Guide