Nokia IP200 Series Installation Manual page 34

2
Installing a Nokia IP200 Security Appliance
To install two IP200 SECURITY Appliances side by side in a 1U
space
1. Secure the rack-mountable shell on the rack with two screws on each side.
Note
To avoid damaging your equipment, Nokia recommends that you use
all four rack-mounting screws when you install your appliance on the
rack.
2. For each appliance you are installing in the shell, use a screwdriver to
rotate both locking latches on the appliance counterclockwise until
34
Mounting Screws
Nokia IP200 Series Security Platform Installation Guide
00427