Nokia IP200 Series Installation Manual page 73

boot manager install command. Use the
for the boot manager.
Caution
It is difficult to remove the use of a password for the boot manager
once it is set. It is also difficult to reset the boot manager password if
you lose it.
The boot manager password gives access to the install command in boot
manager, it does not give access to Nokia IPSO.
To set or change the boot manager password
1. At the boot manager command prompt enter:
2. If the appliance is already protected by a password, enter your current
3. Enter the new password.
4. Enter the new password again.
If you lost or forgot the boot manager password, you can reset it provided that
you have physical access to the appliance (console connection) by using the
following procedure to remove the use of the password function in the boot
manager.
To remove the use of a boot manager password
1. Login to the IPSO shell.
2. Enter the following command:
Nokia IP200 Series Security Platform Installation Guide
BOOTMGR[0]> passwd
The passwd utility prompts you for your current password.
password.
The boot manager prompts you for the new password.
The boot manager prompts you to re-enter the new password for
verification.
Protecting the Boot Manager with a Password
command to set a password
passwd
73