Table of Contents
Advertisement
3
Performing the Initial Configuration
Using the Command-Line Interface
You can also use the Nokia IPSO command-line interface (CLI) to manage and configure Nokia
IP security platforms from the command line. Everything that you can accomplish with Network
Voyager you can also do with the CLI.
To access the command-line interface
1. Log on to the appliance by using a command-line connection (SSH, console, or Telnet) over
a TCP/IP network as an admin, cadmin, or monitor user:
If you log in as a cadmin (cluster administrator) user, you can change and view
configuration settings on all the cluster nodes. For information about how to administer a
cluster, see the traffic management commands section in the CLI Reference Guide for the
version of Nokia IPSO you are using.
2. If you log in as a monitor user, you can execute only the show form of commands. That is,
you can view configuration settings, but you cannot change them.
You can now execute CLI commands from the CLI shell and the Nokia IPSO shell. The Nokia
IPSO shell is what you see when you initially log on to the platform.
Execute from
Nokia IPSO
command line
Nokia IPSO
command line
Command files
For more information about how to access and use the CLI, see the Nokia CLI Reference Guide
for the version of Nokia IPSO you are using.
Using Nokia Horizon Manager
Nokia Horizon Manager is an extension of the Network Voyager management functionality.
While Network Voyager provides the device administrator access to network configuration tasks
(such as interface configuration and routing configuration) and security configuration tasks
(such as user configuration and access configuration), Horizon Manager concentrates on secure
software image, inventory, and platform management of Nokia IP security platforms.
46
All manuals and user guides at all-guides.com
To Implement
Enter the following command to
invoke the CLI shell:
clish
The prompt changes, and you can
then enter CLI commands.
Enter
clish -c "cli-command"
From inside the CLI shell, enter
load commands filename
IP1220 and IP1260 Security Platforms Installation Guide
Purpose
Enter any CLI commands in an interactive
mode with help text and other helpful CLI
features.
Execute a single CLI command. You must
place double-quotation marks
around the CLI command.
Load commands from a text file that contains
commands. The argument must be the name
of a regular file.
Advertisement
Table of Contents
