Nokia IP200 Series Installation Manual page 82

8
Troubleshooting
communicates with the IP200 appliance. If this is not possible with your
laptop computer or terminal, the problem is with the terminal or cable and not
with the appliance.
Problem No console connection to the IP200 appliance.
Solution For information about how to create a console connection, see
"To connect to the console"
Problem Not connected with a null-modem cable.
Solution Verify that you are using a null-modem cable. For pinout
information, see
Problem Wrong terminal settings.
Solution Verify terminal settings: 8 data bits, 1 stop bit, no parity,
9600 bps.
Problem Terminal set for flow control.
Solution The IP200 appliance does not use flow control. The terminal
should be set for no flow control.
Problem Defective IP200 appliance or file system.
Solution Contact the Nokia customer support site listed in
Information"
Login Prompt Appears, But Password Not Accepted
Problem Database is corrupt
Solution Return to default settings or contact the Nokia customer support
site listed in
82
on page 40.
"To connect to the console"
on page 3.
"Nokia Contact Information"
Nokia IP200 Series Security Platform Installation Guide
on page 40.
"Nokia Contact
on page 3.