Henny Penny SMART COMBI FM05-061-A Operating Manual page 59

SmartCombi
No. Parameters
024 Cooling waste steam
083 Time ext. hood (sec.)
084 Beep time (sec.)
015 Altitude
096 Password
225 Scroll direction
235 Temp. Steam
236 Temp. Combi
237 Temp. Convec.
238 Temp. Regeneration
239 Temp. LT cooking
240 Temp. DT cooking
241 Temp. T-Core
Global Foodservice Solutions
™
Pre-set value Possible settings
Normal Minimum, Normal,
Maximum
60 0–600 seconds
20 0–180 seconds
0–500 m. 0–500 m (1,640
●
ft.)
500 m (1,640
●
ft.)–1000 m (3,281
ft.)
1000 m (3,281
●
ft.)–1500 m (4,921
ft.)
> 1500 m (4,921
●
ft.)
111 000–500
Normal Normal/inverse
100 °C 30–130 °C
130 °C 30–250 °C
180 °C 30–300 °C
120 °C 30–180 °C
60 °C 60–100 °C
20 °C 1–100 °C
60 °C 30–99 °C
Operating manual
Operation
Explanation
"Minimum": Minimum water con-
●
sumption but higher condensation
temperature and a greater volume
of waste steam.
"Maximum": Maximum water con-
●
sumption but low condensation
temperature and a low volume of
waste steam.
At this setting, the drain temperat-
ure is < 60 °C (140 °F).
An external extraction hood can be
switched on at the end of the program.
0 = beep off
Altitude above sea level. Set to 0–500
m (1,640 ft.) if the altitude is not known.
Individual passwords can be con-
figured in this area.
Rotation direction of Combi Di al ( 9)
in menus and in the SmartMenu pro-
gram memory.
The default cooking temperature for
this cooking mode can be set within
the shown limits.
The default cooking temperature for
this cooking mode can be set within
the shown limits.
The default cooking temperature for
this cooking mode can be set within
the shown limits.
The default cooking temperature for
this cooking mode can be set within
the shown limits.
The default cooking temperature for
this cooking mode can be set within
the shown limits.
The default cooking temperature for
this cooking mode can be set within
the shown limits.
The default cooking temperature for
this cooking mode can be set within
the shown limits.
59